Performance that shines
Our LED lamp cures your manicure fast, hard and with a dazzling, glossy finish - all while remaining kind to nails.
How to apply
The perfect BioGlow manicure in 4 easy steps
1·Primer
Apply to all 10 nails and air-dry for 15 seconds - no lamp needed.
2·Base Coat
Apply one thin layer to all 10 nails. Cure each hand under the LED lamp for 1 minute.
3·Colour
Apply one thin layer to all 10 nails. Cure each hand for 1 minute & repeat for coat two.
4·Top Coat
Apply one thin layer to all 10 nails. Cure each hand for 2 minutes. Allow 5 minutes to fully harden.
EASY, GENTLE & SAFE REMOVAL
No acetone soaking. No filing. Off in 5 minutes.
- 1
Soak a halved cotton pad in BioGlow Nail Polish Remover.
- 2
Press pad onto nail, then hold in place with the nail clips provided. Repeat for all nails.
- 3
Leave for 5 minutes, then remove - wiping each cotton pad from cuticle to tip.
Loved by You
Effortless Application and Removal
BioGlow completely exceeded my expectations. The formula is incredibly forgiving, applying smoothly without streaks, and the pigment is vibrant in just one to two coats. Best of all, removal was effortless with no aggressive scrubbing or foil wrapping needed.
Salon-Quality Shine at Home
I love how luxurious BioGlow feels and the glossy finish it gives. My nails look as good as a salon gel manicure, making it the perfect choice when you want beautiful results without compromising on nail health.
Top-up your BioGlow
Every piece, on its own.
Our BioGlow products are available to buy separately, making replenishing your manicure easy.
Support
Frequently asked questions.
Answers to the most common questions about our BioGlow manicure. If your BioGlow question isn’t here, contact our friendly Customer Services team on cs@nailberry.co.uk
I’ve never used an LED-curing polish before. Is BioGlow easy to apply?
Yes - our BioGlow primer, colours, base and top coats apply in the same way you would regular nail polish. The only difference is that you cure your manicure under our LED lamp, rather than letting it air-dry. See our how-to >
Can I use my other Nailberry polishes with BioGlow?
As our L’Oxygéné nail polishes and treatments are all air-drying, they do not need to be used with our BioGlow lamp-curing system.Only our BioGlow base coat, colours and top coat need to be cured under our LED lamp.
What’s the difference between your L’Oxygene and BioGlow formulas?
| BioGlow | L’Oxygéné | |
|---|---|---|
| Bio-sourced | ✓ | ✓ |
| Toxin-free | 25-free | 21-free |
| Natural origin ingredients | 65-73% | 75% |
| Oxygenated | × | ✓ |
| Days wear | 12+ | 5-6 |
| How to dry | LED lamp | Air dry |
| Removal | Acetone-free | Acetone-free |
| Colours | 3 (& growing!) | 80+ |
| Routine timings* | 30 mins | 5-30 mins |
Can I use other brand polishes with BioGlow?
Our BioGlow hybrid formulas are unique and our LED lamp is designed to work with this system for best results.
How long does it take to do the full BioGlow manicure?
The total time is around 30 minutes, though this can vary depending on personal technique.
Is BioGlow free from TPO?
Yes. All our BioGlow formulas are free of TPO (Trimethylbenzoyl diphenylphosphine oxide) and other unhealthy monomers, including HEMA.
How is the BioGlow LED lamp different to others?
The spec of our 48W BioGlow LED lamp is significantly higher than most at-home curing lamps. It emits power at a wavelength of 365 + 405 nm / power radiant: ≥30 mW/cm² which, along with the higher wattage, delivers salon-quality fast and even curing, including edges and sidewalls, while reducing the risk of peeling and chips.
Does the BioGlow LED lamp get hot?
The LEDs in our lamp are quartz glass encapsulated which greatly improves performance and experience and reduces heat build-up, ensuring it is safe and effective for your nails. During the 1- and 2-minute curing times, heat does not build up or feel uncomfortable on nails.